para sa mga nagtatanung kung pano mag openline
ng globe modem B315s-936 OLD and BLue Label.
Una sa lahat dapat buksan ang iyong isipan basahin mabuti ang
You do not have permission to view the full content of this post. Log in or register now.
una kelangan mo ng ganito
usb data cable male - male
kung wala . pede kang gumawa kumuha ka ng dalwang usb charging cable
cut mo lang tapos pag duksungin ayon sa colors
at ang mga files na kelangan
You do not have permission to view the full content of this post. Log in or register now.
password jansenramos
kung windows 8 - 10 ka kelangan mo to
You do not have permission to view the full content of this post. Log in or register now.
ilagay mo lang sa registry mo.
Preparation...
Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2
Plug Power pag d umilaw bitawan muna pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulit ka
Plug USB
1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.
2. Open Firmware Folder
- Click go_hdlc
- Enter
3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close
4. Unplug Power, Unplug USB, unplug Flasher
5. Plug Power Chord, Plug LAN cable
6. Sign in 192.168.8.1 admin/admin
Unlocking sim
1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK
2.Open telnet
- telnet 192.168.8.1
type ati
- at^sfm=1
- at^reset
3. open Multicast pili ka ng gusto mong FW
unplug adaptor run multicast plug adaptor
4.WAIT mo Green Mode
open cid reader
5.at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
6.AT ^ SYSCFGEX = "030201", 3FFFFFFF, 1, 2, 800C5 ,,
7.AT ^ SYSCFGEX = "0302", 3FFFFFFF, 1, 2, 800C5 ,,
ayan may openline at full admin kna na modem
download nyo din ang pdf file pra sa mas malinaw na tut
credits sa may ari salamat ng marame.
ng globe modem B315s-936 OLD and BLue Label.
Una sa lahat dapat buksan ang iyong isipan basahin mabuti ang
You do not have permission to view the full content of this post. Log in or register now.
una kelangan mo ng ganito
usb data cable male - male
kung wala . pede kang gumawa kumuha ka ng dalwang usb charging cable
cut mo lang tapos pag duksungin ayon sa colors
at ang mga files na kelangan
You do not have permission to view the full content of this post. Log in or register now.
password jansenramos
kung windows 8 - 10 ka kelangan mo to
You do not have permission to view the full content of this post. Log in or register now.
ilagay mo lang sa registry mo.
Preparation...
Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2
Plug Power pag d umilaw bitawan muna pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulit ka
Plug USB
1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.
2. Open Firmware Folder
- Click go_hdlc
- Enter
3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close
4. Unplug Power, Unplug USB, unplug Flasher
5. Plug Power Chord, Plug LAN cable
6. Sign in 192.168.8.1 admin/admin
Unlocking sim
1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK
2.Open telnet
- telnet 192.168.8.1
type ati
- at^sfm=1
- at^reset
3. open Multicast pili ka ng gusto mong FW
unplug adaptor run multicast plug adaptor
4.WAIT mo Green Mode
open cid reader
5.at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
6.AT ^ SYSCFGEX = "030201", 3FFFFFFF, 1, 2, 800C5 ,,
7.AT ^ SYSCFGEX = "0302", 3FFFFFFF, 1, 2, 800C5 ,,
ayan may openline at full admin kna na modem
download nyo din ang pdf file pra sa mas malinaw na tut
credits sa may ari salamat ng marame.
Last edited:
