What's new

Globe PLDT R051 V006 & V008 Openline Tutorial 2021

Status
Not open for further replies.

Calixxz

Addict
Joined
Jan 30, 2019
Posts
128
Reaction
87
Points
113
This is a tutorial on how to open-line a PLDT Home Wifi. The model is R051.

Before starting please make sure to download this file:
LDT R051 Unlocking Config File
(the file is in .zip format)
If you need help in opening ZIP files refer here

Step 1
Assuming that you have already downloaded the file
Start on extracting the Zip file
The extracted file will be a folder named "PLDT R051 Unlocking Config File" and it contains a tar file "pxa1826_cfg.tar"

Step 2
Open your browser and type 192.168.1.1 then log-in
Use your password to log-in but if it is your first time then use the default password found underneath the WiFi
Check if the software version is P05IPLDT_AP_R051_V008(or V006) and check if it can read the default sim to ensure that the sim slot is not malfunctioning

Step 3
Turn off the modem by removing the power supply(since there is no power button in this model) then remove the sim card

Step 4
Put a non-default sim card(globe prepaid or TM prepaid or GOMO sim) and turn on the modem. Open your browser and type 192.168.1.1 then log-in again
as you can see, it is still an invalid sim as indicated by the device status because it is not yet open-lined

Step 5
Go to Router>Configuration Management>Browse after that, a panel will pop-up, in that panel, browse the file you downloaded "pxa1826_cfg.tar" and select
Then click Update and wait as the modem processes the file and reboots
after the reboot it is not still gonna work, to make it work proceed to step 6

Step 6
Open your browser and type
192.168.1.1 then log-in again and click Required(at the right of the Invalid Sim notice)
Go to MEP Setting and enter the unlock code: 123456 and click unlock
after that, the sim card can be already read by the modem

IMPORTANT NOTICE
THE MODEM WILL RESTORE TO ITS DEFAULT SIM SETTING EVERY TIME YOU REBOOT, THIS MEANS THAT WHEN YOU REBOOT IT WILL BOOT NOT OPEN-LINED, YOU WILL HAVE TO INPUT THE UNLOCK CODE EVERY TIME YOU REBOOT, YOU DO NOT NEED TO INSTALL THE TAR FILE AGAIN




Big Thanks To Mr You do not have permission to view the full content of this post. Log in or register now.
Thank you and God bless you!
 
Last edited by a moderator:
Status
Not open for further replies.

Similar threads

Back
Top