- Joined
- Feb 24, 2018
- Posts
- 5,995
- Solutions
- 30
- Reaction
- 14,417
- Points
- 3,438
While in the Philippines
1. Diagonal white lines
These are areas filled with diagonal white lines and bordered by solid white lines. However, it is not regarded as a technical part of the actual roadway. But for emergencies, vehicles are not expected to stay off there.
Diagonal white lines
2. Solid white shoulder line
The solid white line is the edge of the roadway. Hence, you must not utilize any asphalt or concrete surface beyond this line during driving.
Solid white shoulder line
3. Broken white line (lane driver)
This kind of road markings appears in two situations. One is on the two-lane road. It signifies the center of the two lanes. One is used to mark the division between lanes on multi-lane roads where it means to guide drivers of the different routes.
What’s more, it is legal to cross another lane when you would like to overtake or change line, as long as you give way to those already in the street.
Broken white line (lane driver)
4. Solid white double center line
Remember that you cannot overtake this line, only if making a left turn over it when the way is empty.
Solid white double center line
5. Solid white center lines
They are drawn so as to divide vehicles on a two-way multi-lane road. Unless no oncoming traffic, drivers are discouraged from overtaking or changing lines.
Solid white center lines
6. Solid white lane divider
We often see the solid white lane dividers near intersections or crossroads. They imply that drivers have to stay in the lane. You had better get into the turning lane 50 m before the junction as a practice because it is easier to turn where the lane divider is still broken.
Solid white lane divider
7. Solid yellow double center line
Aside from white lines, this line denotes that it is insecure about overtaking. In most cases, you may find them around blind curves, in areas where fast-moving two-way vehicles meet on an undivided road or somewhere on which there are no other lane dividers.
Mixed centerline: a combination of solid yellow and broken yellow or white line
A grouping of yellow and white lines: the road yellow lines' meaning is that cars could not cross lanes from it. The white lines indicate that the smaller roads' vehicles may merge into the highway whenever there is no oncoming traffic.
Solid yellow double center line
8. Broken blue lane divider
Next up is a blue lane, which indicates the motorcycle lane, is broken and along thoroughfares so as to keep the motorbikes safe from larger vehicles.
Riders may move into or out of it, yet bear in mind that this lane is preferably reserved for motorcycles.
Broken blue lane divider
9. Directional arrows or lane arrows
As usual, drivers base these directional arrows or lane arrows to determine the lane to turn. There are single-headed (straight-headed) arrows, double-headed arrows, and U-shaped arrows.
Single-headed or straight-headed one denotes that you have to go straight ahead. Double-headed shape directs you to turn both right and left in your lane. Finally, the U-shaped arrows imply that a U-turn slot ahead is near you. Take note these particular markings as they are significant in some quarters.
Directional arrows or lane arrows
10. Broken yellow lane divider
Next, the broken yellow lane divider denotes areas where drivers can merge into the bus lane (or the bicycle lane - be up to region) owing to EDSA turning off.
Mixed double lane divider: a combination of solid yellow and broken yellow or white line.
This road marking is often found in areas where smaller arteries merge into thoroughfares or where feeder roads merge onto the highway. You could not cross this lane, whereas the traffic on the other side can do that while no oncoming vehicles.
Broken yellow lane divider
11. Solid yellow lane divider
You had better take in this road marking, especially while driving along EDSA (EDSA is the abbreviation of ‘Epifanio de Los Santos Avenue’, is a limited-access circumferential highway around Manila capital and is also the main thoroughfare in Metro Manila)
The solid yellow lane drivers signify the bus lanes, yet in other areas in the Philippines, these are supposed only to be bikes (bicycles).
Solid yellow lane divider
12. Solid white horizontal line
This one informs the place where you must stop at a stoplight or stop sign.
Solid white horizontal line
13. Rumble strips
These rumble strips consist of many horizontal and narrowly spaced lines. Once encountering them, you must be careful due to hazards, merging lanes, or blind curves ahead. Indeed, it is high time to slow down.
Rumble strips
14. Zebra crossing
In many countries, not only in the Philippines, the zebra crossing is always a priority for pedestrians. Bear in mind that stopping or parking over this area at a red light is a traffic violation.
Zebra crossing
15. The yellow box
Another kind of road markings can often be seen in the crossings - the yellow box. Notice that you are not allowed to stop or park within this area because this box informs the part that must-by law-be kept open at all times.
In any case, even in the absence of a light or green light, this area must be kept clear. Hence, it is better to wait until there is enough space for you to move.
16. Road lines' meaning in the Philippines: Conclusion
In a nutshell, road lines' meaning in the Philippines play a vital role in traffic. Anyone should be a responsible driver. Thus, everyone has to bring-up-to-date these needed markings and remember road lines explained to keep yourself safe on the road.
Last edited:
