What's new

Xiaomi Redmi 6a,6 or Note 8 Pro new exploit(No need auth. Mi acc. to flash rom)

Jck-Frost

Eternal Poster
Joined
Oct 25, 2014
Posts
406
Reaction
286
Points
269
Share share! Habang mainit init pa! Bagong bago!

Before, we need an Authorized Mi Account to flash rom through MiFlashPro tool, SP Flash Tool or MiFlashTool or minsan talagang required na gumamit na tayo ng dongle or box para lang mai flash yung rom ng Xiaomi natin particularly on MTK devices.

This is actually for MTK devices po. New exploit sya, it can bypass Auth. Mi account requirement to flash rom.

And this is for dead boot or hardbricked/softbricked MTK phones.

Let's start!

Needs:
Tools (Nandito na lahat sa download link): You do not have permission to view the full content of this post. Log in or register now.
Redmi 6a FRP unlock file (Para ma test if working yung sa inyo, if nag flash, you can proceed on downloading stock rom ni Redmi 6a natin): Download link

Preparation:

1. Install python.
note: pag mag iinstall nyo yung python, make sure i thick nyo yung add to path something.
2. Open CMD then type:
python -m pip install pyusb pyserial json5
3. Install libusb-win32-devel-filter-1.2.6.0 then launch nyo, then choose:
"Install a device filter"
4. Click Next then put your phone into edl mode, you can do that by pressing volume up then insert cable, after mo i insert, ma dedetect yun ni libusb filter installer, i click nyo agad para mai filter nyo, pag nag dc, reconnect nyo lang.
5. Pag na filter nyo na yung port ng cp nyo, go to: Bypass folder dun sa dinownload nyong tools, then click on:
brom > since batch file sya, may mag popop up na ganito:
1611837635658.png



6: Insert nyo na yung usb cable sa pc nyo then press volume up then connect na din yung cable sa cp. pagtapos nyan, ganito dapat lalabas:

1611837711488.png


Pag ganyan lumabas, goods na yan. proceed na tayo sa next step, go to flash tool directory na, then open flash_tool.
7: Pag na open nyo na yung flash_tool, go to: Options > Options > Connection > Then click UART > Comport (Choose comport nung device mo) > Baud rate: 921600 dapat.
8. Close na mo na yung settings then click on scatter-loading File then choose mo yung scatter file nung dinownload mo kaninang pang bypass ng FRP.
9. Click Download then wait mo, mag faflash na yan.
 

Attachments

Sorry preparation pa din yung nakalagay pero nag proceed na sa tutorial! Nakalimutan lang i edit.
 
Back
Top