Closed Ayaw bumukas ng phone

[jejk2419]

Pa help nman po ung Android phone ko kasi ayaw na mag turn on as in khit i press and hold pa ung power wla na tlaga. the last thing lng na ginawa ko is naglaro tas bigla nag dim black ung screen then ayae na mapindot kahit ano hnggang na lowbat na. tas after ayaw na mag turn on ska mag charge. Ano po kaya problem?

 

[dnsserver]

tinanggal mo na battery?

 

[Mr_ Yhozo02]

hardware o battery lang yan.

 

[rodel1123]

Sir bricked na yung phone mo...
madali lang yan sir...
Depende kung maibabalik pa yung data nyan...
Maraming paraan para dyan...pedeng soft unbrick or palitan mo ng ROM..
Bigay mo saken model Cp mo..ipopost ko kung paano ayusin yan..

 

[jejk2419]

Ndi ko po matanggal ung battery built-in kas

tinanggal mo na battery?

hardware o battery lang yan.

Cherry Mobile Flare S3 Power po

Sir bricked na yung phone mo...
madali lang yan sir...
Depende kung maibabalik pa yung data nyan...
Maraming paraan para dyan...pedeng soft unbrick or palitan mo ng ROM..
Bigay mo saken model Cp mo..ipopost ko kung paano ayusin yan..

Salamat po sa inyo!

 

[rodel1123]

Hmmm...cherry mobile pala yan...mahirap maghanap ng stock ROM nyan pero subukan mo narin.
I-search mo kay google...
step 1:
"Model ng phone mo + stock ROM"
Pag wala kang mahanap kahit custom ROM pede yan, may ilang features yan na wala sa CP mo...idownload mo .
step 2 :
DOWNLOAD "Odin3"( in your pc)
Step 3 :
Go to "download mode" at your phone".
( its either "power button + vol. Down" or power button + vol. Down + home button[ if home button exist ].
kung di mo mapapunta sa download mode search mo sa YøùTùbé.
"Model ng phone mo"download mode.
step 4 :
Connect your phone using usb connector( it goes without saying ...hahaha) to your pc.
step 5 :
After the phone( which is in Download mode is connected).
Youll see options there check it likewise it it shown in the picture.

 

[rodel1123]

Sorry hahha na cut..
eto
step 6:
Check and click on AP...hanapin mo yung ROM file na dinownload mo tapos iclick mo.
Then wait...this process will only take a few minutes.
Youll see in your phone or in Odin3 a bar indicating your phones being repair in progress...tadaan do not disconnect while it is in progress.
after it is finished your phone will automatcally reboot.
And thats it...it will only be just like new.
Hope it helps.
pm me if a problem occurs okay ??

 

[jejk2419]

Thanks rodel1123! Try ko to. PM nlng kita if may prob.

 

[jejk2419]

rodel1123 panu po mapunta sa Download mode kung ayaw na po mag open ng CP? Dead na kasi

 

[rodel1123]

Wait...post ko mamaya..
nasa work pa ko..

 

[jejk2419]

Wait...post ko mamaya..
nasa work pa ko..

Ok bro. No problem.

 

[rodel1123]

OK bro eto na..
so base sa description mo...( akala ko kasi Soft Bricked lang.)
yung CP mo is Hard Bricked.
actually there were few methods we could use to fix it.
so yung sa taas na post ko is for Soft Bricked Device.
To cut it short...
download your phones ROM.
download Sp flash tool(yeah.. were not using Odin like in the 1st method.)( just search the net.. I dont have a file in my storage..hahaha)
(since your phone isn't opening)
you need a stable USB connector.
....
so lets start by opening SP flash tool.( see the image for refference.)
you'll see a option there " DOWNLOAD ONLY ".
change it to "format + download".
after that remove your phones battery.insert it again.
click at the top " DOWNLOAD ".( you must first hit the download button before plugging your phone into Pc.)
connect your phone into your pc with you connector.( Sp flash tool will wait for a device to connect. )
it wouldn't actually show in your phones screen but youll see at SP that your download is progressing.
( remember" stable USB Cord okay..)
so just wait for it to finish.
after that your phone will reboot.
your phone nows good as new.

if this doesnt work then you might either have to buy a USBjig.(you can buy it in Internet)
if USbjig doesnt work uhmm.. the last ones pretty expensive so lets just save it if this didnt work.( lets hope it works.)
PM me if theres still some problem.
It would help if you can send me some pictures on how you fix it.. so that ill have some idea how to fix it.

 

[bLack_sMaug]

firmware kelangan mo di ROM.

requirements:
firmware
sp flashtool
usb driver for MTK phone

1st install mo usb driver depende sa windows n gagamotin mo. kung naguguluhan ka. search mo nalang.
usb driver ang importe dahil d babasahin cp mo kung d naka install ang usb driver.

2nd open mo folder spflash tool may application xa dun .then rightclick RUN AS ADMINISTRATOR. then mag oopen na un.lagay mo na ung firmware sa spflshtool .

3rd if your cp removable .remove mo kung hindi plug mo n usb cord mo then press power + vol+ .

4th click format . then w8 matapos. then hit download.

w8 hangang 100%.
ur done bro.

 

[bLack_sMaug]

ung 3rd. i mean battery kung removable o hindi

 

[bLack_sMaug]

ito link firmware mo


You do not have permission to view the full content of this post. Log in or register now.

 

[jejk2419]

bLack_sMaug rodel1123 ok na po lahat ng tools. One problem nlng is pag connect ko sa laptop wla pong ngyayaring process sa SP Flash. Wlang lumalabas na success gaya ng mga nkita ko sa YøùTùbé. Base po sa observation ko and panunuod sa YøùTùbé hard brick nga yung phone ko.

sa tingin ko prob ko ung USB cable or sa driver cguro. may nbasa kasi ko na dpat lalabas sa device manager ung port.

 

[Jmrie_]

try mo.other usb cable if ayaw baka sa charging port or drivers mo

 

[rodel1123]

Bro try mo muna kung working pa yung battery mo..
kapag wala sa battery problem bili ka nalang sa Net ng USBjig...
mahirap talaga pag na Hard Bricked phone mo.
ang pinaka mainam na sulusyon dyan ehh bumili ka nalang ng bago...
wala eh ganun tlaga ang buhay ng mga gadget..lalo na kapag Cherry ...short living lang kasi talaga mga CP sa kanila.subok ko na yang cherry na yan...
Another method is to Jtag your phone...( this is the method I said earlier which is expensive...so think twice before you get your phone Jtag-ed.)
Well jtag will surely fix your phone...

 

[jejk2419]

USB cable cguro prob kasi good condition pa battery ko matagal pa ma-lowbat un. Try ko muna bumili ng mgandang cable pag ayaw pa din dun na sa last resort. Ang bumili ng new phone.

Thanks sa inyo. Pag praktisan ko mag Flash gamit Cherry. Salamat mga ka PHC!

 

[bLack_sMaug]

bLack_sMaug rodel1123 ok na po lahat ng tools. One problem nlng is pag connect ko saauto top wla pong ngyayaring process sa SP Flash. Wlang lumalabas na success gaya ng mga nkita ko sa ÿôutubê. Base po sa observation ko and panunuod sa ÿôutubê hard brick nga yung phone ko.

sa tingin ko prob ko ung USB cable or sa driver cguro. may nbasa kasi ko na dpat lalabas sa device manager ung port.

kahit anong cable basta original. then baka d compatible ung usb driver . ang pag install ng driver eh manual para ok.tingnan mo nalang tutorial kung d mo magets.
kung natatangal battery mo tanggalin mo. kung hindi ok lang . plug mo na cp mo then hold power at vol+ .pag may narinig ka CDC ok na un .gagana na ung SPflashtool .
basta tandaan mo format mo muna sa spflashtool bago ung download.