What's new

Tools B315s-936 power light repair made easy

HeisenbergWW

Forum Veteran
Elite
Joined
Apr 21, 2013
Posts
1,932
Reaction
3,404
Points
807
Una sa lahat hindi akin to. Dami kasi nagppm bumabalik sa powerled mag flash new firmware. Credits sa mga may ari neto. Pinulot ko lang to kung saan saan

Pwede na din mag change any firmware via web gui (local update). Nasa ibang post ko ang mga firmwares.


Download needed files here:
:) You do not have permission to view the full content of this post. Log in or register now. :)You do not have permission to view the full content of this post. Log in or register now.

Steps:

1. Jumper - ground two points. Dapat walang iilaw sa modem kahit isa. Refer to the pic below :)

pict_boot.jpg

2. Plug USB to USB cable. May ma detect na 3G PC UI Interface

3. Open files. Run
commitblocks.cmd then select option number 1 (Ok)

4. Turn off Modem then do the Jumper - ground two points

5 Open files. Run
load_usbdloader.cmd. Tingnan ko na detect ang port

6. Open files. Run
B315s-22_Update_21.311.05.00.00_M_01.01_nvr.exe

7. Once done na flashing. Hintayin lang mag reboot at tanggalin usb to usb cable at power.

8. Saksak adaptor ulit.


9. Success flashing. Buhay na.

10. Update firmwares like 21.321 and 21.315 thru local update. Update menu -> Local Update | Update -> Local update.

Para sa mga firmwares. Dito ang thread: https://phcorner.net/t/b315s-936-evo-polko-latest-at-added-2100mhz-pwede.350495/

Credits to those who made these tools/files/ideas. 4pda.ru
 

Attachments

Last edited by a moderator:
pinulot mo nalang sa kabila, tinanggal mo pa yung mga credits. nireupload pa. haha.
hindi ko naman sinabi na magcredits ka sa TS ng kabila, pero at least magbigay ka naman ng credits sa true source nyan na 4pda.ru.
 
ts ang isue saken di ko po ma unlock..
stack ako sa red led ayaw mapunta sa blue then green to be USB mode na.
bakit ganun? bebit12345
 
good morning at all, I deleted all the partitions in the router nvram, as you could do to reinstall the firmware?
 
magandang umaga sa lahat, tinanggal ko ang firmware ng b315s-22 nang hindi sinasadya, maaari mo itong muling i-install, maaari mo bang ipaliwanag sa akin kung paano ito nagagawa?
 
Back
Top