- Joined
- Jul 25, 2016
- Posts
- 5,004
- Reaction
- 6,009
- Points
- 1,546
No more annoying question mark when flashing.
Balong Flash & Usbdload [English]
balong_flash.exe: You do not have permission to view the full content of this post. Log in or register now.
balong_usbdload.exe: You do not have permission to view the full content of this post. Log in or register now.
Test the program by creating a batch file(file.bat/cmd).
• file.bat/file.cmd
Add the ff. codes below then launch.
• Help - access help
› Balong Flash
› Balong Usbdload
• Extract Firmware Images - extract images from a firmware.
• Flash - Flash firmware or firmware images, just put the firmware images inside the root folder together with balong_flash.exe. Change %com_port% to PC UI Interface Com port number.
› Flashing a firmware
› Flashing firmware images located in root folder.
› Flashing firmware images located inside a directory. Sample directory "Images".
› balong_flash.exe - located inside the Firmware's SFX Installer e.g. Firmware.exe(Open via WinRar) and replace the russian version with english.
› balong_usbdload.exe - located inside USB Mode's bin folder. Open USB Mode.exe via WinRar and replace balong_usbdload.exe with english version.
Tried and tested with no errors. The archive contains English and the original Russian version.
Translated by oatmeal
Balong Flash & Usbdload [English]
balong_flash.exe: You do not have permission to view the full content of this post. Log in or register now.
balong_usbdload.exe: You do not have permission to view the full content of this post. Log in or register now.
Test the program by creating a batch file(file.bat/cmd).
• file.bat/file.cmd
Code:
@echo off
balong_flash -h
set /p <nul =Press any key to exit... & pause >nul
• Help - access help
› Balong Flash
balong_flash -h
› Balong Usbdload
balong_usbdload -h
• Extract Firmware Images - extract images from a firmware.
balong_flash -e firmware.bin
• Flash - Flash firmware or firmware images, just put the firmware images inside the root folder together with balong_flash.exe. Change %com_port% to PC UI Interface Com port number.
› Flashing a firmware
balong_flash -p %com_port% firmware.bin
balong_flash -p 22 firmware.bin
› Flashing firmware images located in root folder.
balong_flash -p %com_port% -n .
balong_flash -p 22 -n .
› Flashing firmware images located inside a directory. Sample directory "Images".
balong_flash -p %com_port% -n "Images"
balong_flash -p 22 -n "Images"
› balong_flash.exe - located inside the Firmware's SFX Installer e.g. Firmware.exe(Open via WinRar) and replace the russian version with english.
› balong_usbdload.exe - located inside USB Mode's bin folder. Open USB Mode.exe via WinRar and replace balong_usbdload.exe with english version.
Tried and tested with no errors. The archive contains English and the original Russian version.
Translated by oatmeal
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.
Last edited: