What's new

Tutorial Finally! openline smart evoluzn fx pr1 or 2 or globe youwin m023j

Sa mga may GLOBE M023J with L02C_1_30 boards na nakakakonek na sa 3g but not LTE try this and let me know.

1. Use this You do not have permission to view the full content of this post. Log in or register now.

2. Flash with "Erase all" and tick all checkboxes as in default.

3. Insert Smart LTE sim muna then turn it on

4. Pasok ka sa dashboard para maenter MEP pin 123456. Then let it connect sa 3g.

5. This is optional pero kung may backup ka ng IMEI/MAC/SN ibalik mo na thru MIFITOOL

6. Turn it off.

7. Open ulit SWDownloader and this time icheck lang natin:
TIMH
OBMI
and RFBN

now sa RBFN palitan mo yung file to GLOBE_Youwin_MO23J_4G-LTE_Pocket_WiFi.bin

uncheck mo pala yung "Erase All" kasi di siya magfflash

Mabilis lang flashing then turn it on and check kung coconnect nasiya ng 4g :)

Pag 4g na smart turn it off then insert Globe sim then check. Minsan you need to go the dashboard para maforce connect siya sa globe.

Pag di padin repeat step 7 then choose SkylarkL02CLZMA1104.bin as RFBN then check ulit kung 4g na.

Yan yung gumana sakin, parang ang trick is to reflash the RFBN files. Di siya nakukuha sa unang flash. Pinagpapalit palit ko yung GLOBE_Youwin_MO23J_4G-LTE_Pocket_WiFi.bin at SkylarkL02CLZMA1104.bin hanggang sa nakuha kong parehong network LTE na. Note na pang L02C_1_30 board to. Pag sa iba yung mga LED models you can try na palit palitan RFBN using yung mga compatible sa inyo.

Please let me know kung may matutulungan to.
Working po tutorial na to ..nasubukan ko sya pero nagkaron lang ako ng problema sa mga LED lights ..ang nailagay ko kasing firmware is yung pang M023J kaso ang device ko FX PR2 ..openline sya kaso only for pc lang ang internet sharing ..hindi pwede sa wifi ..
 
Last edited by a moderator:
paano
sir rald0625 i'attached niyo nalang po or pm niyo nalang po sakin w/t attached file.. kasi di ko po alam papaano gagawin dito.. ito pong tut mo po ang i'aapply ko sana mag work sakin.. maraming salamat sir.. keep o
cge pag nakahanap ulit ako nung pdf,
Pero actually hindi na kailangan yun kasi may ReliableData.bin na akong ginawa na applicable sa lahat ng FX PR1 at M023J.
Just follow carefully the instructions sa tutorial.. simplified na siya
paano mag openline ng m023j using phone only?
 
Stock ako sa splash screen.. "WELCOME" lang nakalaga hindi sa nag tutulo.. kahit ireset ko ayaw din mareset.. FX PR1 here.. :D
 
pa help naman po nag stock na yung akin sa welcome sana may makatulong kahit yung stock firmware lang po for FX
PR1
 
Back
Top