Tutorial How to openline (unlock) and debrand huawei e5573cs-933 (globe)

[completely1cky]

Bat di lumalabas ang sa step 7? meron nman akong naririnig na input sound after kong magawa. help please!!

 

[dheck89]

Hindi mo nagawa ng tama. Ishort mo mabuti para lumabas yun sir.

 

[completely1cky]

Hindi mo nagawa ng tama. Ishort mo mabuti para lumabas yun sir.

Lumipat ako ng ibang pc sir. another problem is, stuck ako sa last part! Nag eerror. tama nman lahat ng steps ko.

 

[completely1cky]

Sorry for the double post. After third fails. inassemble ko nlng ulit ung device. nakikita ko nman sa wifi ang HUAWEI-4050 (default:HUAWEI-6FF5). kaso di ko alam ang password.

EDIT: Replugged device to another pc, merong nadetect na device sa This PC (My Computer). Ran the Autorun file at nag pop-up na ang home page. Now stuck sa Modify Password, ano default password nito?

 

[e2000]

thanks for sharing ma-try ito later.

 

[IanTheExplorer]

19. Run HxD and type out the serial number on the right side.

20. Now type in this command: AT^NVWR=6,16,** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **
Replace ** with the hex code you got from HxD (copy paste the values in the middle (between the zeros and the serial number you just typed. Press enter. It should say OK.

21. Now type in this command: AT^CIMEI="*****". For example if your imei is 1234567890123456, then you would type: AT^CIMEI="123456789123456"
Replace * with your IMEI. Press enter. It should say O Nahirapan ako d2 wala ba? video tutorial

 

[7thseer]

Hello, looks like the file is corrupted.
Please, is there an alternative to downloading the rar file.
Thank you in advance.

 

[completely1cky]

19. Run HxD and type out the serial number on the right side.

20. Now type in this command: AT^NVWR=6,16,** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **
Replace ** with the hex code you got from HxD (copy paste the values in the middle (between the zeros and the serial number you just typed. Press enter. It should say OK.

21. Now type in this command: AT^CIMEI="*****". For example if your imei is 1234567890123456, then you would type: AT^CIMEI="123456789123456"
Replace * with your IMEI. Press enter. It should say O Nahirapan ako d2 wala ba? video tutorial

Make sure sa Step 21. isali mo ang quotation marks in between the IMEI.

 

[IanTheExplorer]

OKAY Na. Napaganakuna hindi kulang ma reset. sain-nyo ba? na reset. nyo "Salamat"

 

[AkosiHeart01]

Kaya po ba pag telenor firmware? Firmware : 21.323.01.01.274

 

[IanTheExplorer]

Paano ibalik sa dati? SOFTWARE

 

[dheck89]

Wala tayong firmware para maibalik sa stock

 

[AkosiHeart01]

Basta wag masyado mag upgrade... Ma-locked ulit :c

 

[RiuneHaru]

Ask ko lang po, if openline na po ba, pwede narin taasan ang max speed, kasi max speed lang niya is 42mbps. Yung mga binebenta kasi na openline is 150mpbs. Thanks po sa sagot.

 

[supersandra20]

Ask ko lang po, if openline na po ba, pwede narin taasan ang max speed, kasi max speed lang niya is 42mbps. Yung mga binebenta kasi na openline is 150mpbs. Thanks po sa sagot.

ganun parin ata openline o hindi

 

[razz1354]

Patulong sa balong loader. May pop out after iclick ang load. kaso di ko maintindihan ang message.

 

[razz1354]

stucked sa step no 9. after iclick ang load.

patulong naman

 

[phc-Unknown]

Boss pa help paunlock ng sakin?

 

[razz1354]

master pa update naman ako nung problem ko. ayan sa taas ang SS.

 

[AkosiHeart01]

master pa update naman ako nung problem ko. ayan sa taas ang SS.

Naka 3g boot na yan. Change PW na next to do