I am nobody
Forum Guru
Sa zlt s12pro yan, not calibrated kasi yung 2.4G na wifi kaya sigoro nag didisconnect. Any idea pano e calibrate yan?
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.
wow galing naman openwrt, na try mo na ba mag serial connection sa modem na to lods? Nakaka pag sent kaba ng command using serial?It may not only be that the wifi is not calibrated, but the radio does run hot under the stock firmware that could be causing the wifi woes of some for this unit. I have converted S12Pro to a working OpenWrt build and I did not experience the same wifi instability as that of stock. Also the radio runs cooler as a result.
Under OpenWrt yes. I'm not sure about stock, it must have been read-only.wow galing naman openwrt, na try mo na ba mag serial connection sa modem na to lods? Nakaka pag sent kaba ng command using serial?
Ay impossible pala to ma unbrickUnder OpenWrt yes. I'm not sure about stock, it must have been read-only.
stable ba yung 4g signal ng openwrt lods?It may not only be that the wifi is not calibrated, but the radio does run hot under the stock firmware that could be causing the wifi woes of some for this unit. I have converted S12Pro to a working OpenWrt build and I did not experience the same wifi instability as that of stock. Also the radio runs cooler as a result.
Ay impossible pala to ma unbrick
It can be recovered from a brick so long as the bootloader remains undamaged. The conversion of this device into OpenWrt only happens on the router side. There is another device inside the unit, the LTE module connected to a mini pci-e slot that handles the mobile network communications and this remains untouched. This is reponsible for the signal, bands etc.Ay impossible pala to ma unbrick
stable ba yung 4g signal ng openwrt lods?
Wow, mas maganda pala openwrt, I think openwrt din tong default ng s12pro pero sobrang outdated.It can be recovered from a brick so long as the bootloader remains undamaged. The conversion of this device into OpenWrt only happens on the router side. There is another device inside the unit, the LTE module connected to a mini pci-e slot that handles the mobile network communications and this remains untouched. This is reponsible for the signal, bands etc.
In my experience I get better mobile network performance under OpenWrt than stock.
Ay impossible pala to ma unbrick
You can check here for more info.Wow, mas maganda pala openwrt, I think openwrt din tong default ng s12pro pero sobrang outdated.
I think di pa naman na sira yung bootloader nya kasi nagboboot pa siya makikita yung logs sa serial monitor. Ayaw lang mag response sa serial command, naka disabled ata
Patulong lods