What's new

PLDT Boosteven R281 (Band Locking)

Status
Not open for further replies.
4.2 dapat yung sa bricked pero missing na info niya ngayon (sa software info 4.2 naman nakalagay) >< yung sa gf ko naman 4.2 din pero untouched
 
Mga lods, eto nangyare sa tower na kinokonekan ko after Sept 30.
From 15 SINR to 3 SINR nalang. Humina signal ng tower ko kahit naka fix naman yung Antenna ko. From 60 Mbps to 15 Mbps nalang. Anyare kaya? Nagdowngrade ng tower samen??
fast sinr.png
 

Attachments

Mga lods, eto nangyare sa tower na kinokonekan ko after Sept 30.
From 15 SINR to 3 SINR nalang. Humina signal ng tower ko kahit naka fix naman yung Antenna ko. From 60 Mbps to 15 Mbps nalang. Anyare kaya? Nagdowngrade ng tower samen??
View attachment 1649226
madami na yata rocket sim user sa inyo.
sakin same parin naman ang speed at SINR
IMG_20211003_130536.jpg
 

Attachments

D ba config yung ibang mtd files mga master mga, Lods. Bakit pinadump lahat ni Master Eugene yung mtd files.
May mga layer kac yung mga mtd files,

Layer1 ---- mtd1. Mtd2
Later2-----mtd3. Mtd4
Layer3-----mtd5. Mtd6. Mtd7. And so

on....

D ba config yung ibang mtd files mga master mga, Lods. Bakit pinadump lahat ni Master Eugene yung mtd files.
May mga layer kac yung mga mtd files,

Layer1 ---- mtd1. Mtd2
Later2-----mtd3. Mtd4
Layer3-----mtd5. Mtd6. Mtd7. And so

on....
Kasi dapat ito ang command pag full ang backup or iisa lang ang formware:
sysupgrade -v -n /tmp/name_of_backup.bin.
The -n option is added if you DO NOT want to preserve any old configuration files and configure upgraded device from clean state (network/system settings will be lost as well)
 
Kasi dapat ito ang command pag full ang backup or iisa lang ang formware:
sysupgrade -v -n /tmp/name_of_backup.bin.
The -n option is added if you DO NOT want to preserve any old configuration files and configure upgraded device from clean state (network/system settings will be lost as well)

San mo nakuha Source nyan, Lods. Nc info👍👍
 
Lods magkano pa unlock ng d2k?

Tama ba To Lods, Hawk

Pa check sa mga masters

Kasi dapat ito ang command pag full ang backup or iisa lang ang firmware:
sysupgrade -v -n /tmp/name_of_backup.bin.
The -n option is added if you DO NOT want to preserve any old configuration files and configure upgraded device from clean state (network/system settings will be lost as well)
 
PM nyo lang po ako sa facebook, habang hindi pa nag uupdate ang PLDT paremote na yung iba. Kayo din mahihirapan kapag nag update ang D2K, may leak url na dito sa PHC, hindi sa TR069 ang pasok ng ota, nasa ftp, naka config sa nvram.

Pm later Master Pag dumating, yung Order sa Lzd. 699php, kaso walang free voucher sa shipping damot Lazada hehe
 
Kasi dapat ito ang command pag full ang backup or iisa lang ang formware:
sysupgrade -v -n /tmp/name_of_backup.bin.
The -n option is added if you DO NOT want to preserve any old configuration files and configure upgraded device from clean state (network/system settings will be lost as well)
thoughts dito mga masters?
 
Status
Not open for further replies.

Users search this thread by keywords

  1. smartbro r021
  2. evoluzn Pldt Fx- Id3
  3. Pldt home 4.2
  4. pxa1826_cfg.tar
  5. v2raya
Back
Top