PLDT Boosteven R281 (Band Locking)

[Am-Am]

mga master maglalockband sana ako ng tatlong band sa ssh...band 1,3,28 ....tama po ba ang command dito na


ubus call version set_atcmd_info '{"atcmd":"AT+ZNLOCKBAND=1,0,8000005,0"}'

 

[kulapow10101]

Meron din Ca, Lods. Pang alternate lang kac Mura, saka pwede i mods antenna. May unlock na din at bandlocking kay Master Jerome

Ahh. thanks sa info lods. Hintayin ko lang bumalik signal dito samen kung babalik pa

 

[Xpmove12]

mga master maglalockband sana ako ng tatlong band sa ssh...band 1,3,28 ....tama po ba ang command dito na


ubus call version set_atcmd_info '{"atcmd":"AT+ZNLOCKBAND=1,0,8000005,0"}'

Tama yan, Lods

 

[Am-Am]

Tama yan, Lods

thanks sa pagsagot lods

back to 3/28 muna ulet ..sablay band 1 samin

 

[H4wk3ye]

No antenna PEAK HOUR

 

[thegenius]

Ganito dump para hindi mahirapan.

First check or find firmware1 at firmware2
cat /proc/mtd

Then
cat /dev/mtd{number ng firmware1} > /tmp/firmware1_mtd{number ng firmware1}.bin
cat /dev/mtd{number ng firmware2} > /tmp/firmware2_mtd{number ng firmware2}.bin

Then compress nyo nalang para maging single file.

Then share link nalang, wala din naman kwenta kahit makuha ng iba ang link, may file hosting dito sa phcorner, dropmb. Dun nyo nalang iupload.

Sensya po sir kaka uwi lang ito po link ng dump sakin kaso sa inyo na po ata yung firmware1 nya.
You do not have permission to view the full content of this post. Log in or register now.

 

[Am-Am]

No antenna PEAK HOUR

View attachment 1649468

lakas naman nyan master...eto saken no antenna din ..

 

[Xpmove12]

Sensya po sir kaka uwi lang ito po link ng dump sakin kaso sa inyo na po ata yung firmware1 nya.
You do not have permission to view the full content of this post. Log in or register now.

Naunahan ka ni Ameee, Lods.

Antay pa natin updates ni Master Jerome mukhang pagod at puyat na.
Andami daw nagpa remote d2k

 

[thegenius]

Naunahan ka ni Ameee, Lods.

Antay pa natin updates ni Master Jerome mukhang pagod at puyat na.
Andami daw nagpa remote d2k

hehehehe bz din kasi yung may luma na firmware mukhang me pagasa ma balik sa previous na version.tung r281 disable ota na lang din. malapit na.

 

[Xpmove12]

hehehehe bz din kasi yung may luma na firmware mukhang me pagasa ma balik sa previous na version.tung r281 disable ota na lang din. malapit na.

Ok Lods, try mo rin to baka working sa u

gallium8 said:
Kasi dapat ito ang command pag full ang backup or iisa lang ang formware:
sysupgrade -v -n /tmp/name_of_backup.bin.
The -n option is added if you DO NOT want to preserve any old configuration files and configure upgraded device from clean state (network/system settings will be lost as well)

 

[_ameee]

sorry mga masters natagalan. kakauwi lang kasi.

BRICKED 4.2 FIRMARE: You do not have permission to view the full content of this post. Log in or register now.
UNTOUCHED 4.2 FIRMWARE: You do not have permission to view the full content of this post. Log in or register now.

sana po makatulong talaga.
about naman po sa PN, paguide nalang if paano makita.

 

[thegenius]

full upgrade yata tu nakita ko na tu sa loob ng modem not sure san na directory. script din sya. para way par safe na ma upgrade ang firmware.

 

[jeromelaliag]

Based on You do not have permission to view the full content of this post. Log in or register now.

You do not have permission to view the full content of this post. Log in or register now. - mtd4-firmware1.bin

 

[_ameee]

Ok Lods, try mo rin to baka working sa u

gallium8 said:
Kasi dapat ito ang command pag full ang backup or iisa lang ang formware:
sysupgrade -v -n /tmp/name_of_backup.bin.
The -n option is added if you DO NOT want to preserve any old configuration files and configure upgraded device from clean state (network/system settings will be lost as well)

master thoughts about this?

 

[thegenius]

Based on You do not have permission to view the full content of this post. Log in or register now.

You do not have permission to view the full content of this post. Log in or register now. - mtd4-firmware1.bin

try ko na po sir?

 

[jeromelaliag]

master thoughts about this?

mtd write lang ako kapag dinump ko lang ang mtd, kapag opensource build ko lang ginagawa yan.

 

[jeromelaliag]

try ko na po sir?

Ibang version na po yan.

 

[_ameee]

sa 4.2 na modem ko kaya itry?

 

[thegenius]

Ibang version na po yan.

ok na ata sir

 

[_ameee]

ok na ata sir
View attachment 1649544

pahelp master sa commands