PLDT Boosteven R281 (Band Locking)

[valir_]

sir palink nung firmwares mo. bumili kasi ako ulit ng r281 try ko iflash. pakiexclude nalang po yung mtd na merong personal info. salamat!

Saan ka po bumili lods tsaka magkano?

 

[Itsmark213]

Uu Lods, na seen ko mga comments backread 160 up

Saka na seen ko rin sa mga yt video permanent network unlock, ung easy bandlocking temporary mare removed yan pag nag factory reset ka

Gamit kana lang nginx pang bandlocking nasa page 1 download,

Pwede rin bandlocking sa termux at ssh, na seen ko lahat sa page 143 ups



Mag back read ka Lods, start page 146, hanapin mo nag post at offer





Mag back read ka Lods, start page 146, hanapin mo nag post at offer

Unlocked na po sakin grabe wala pang 10 minutes hahaha.

Btw alam niyo po pano mapalitan yung apn ng r281? Pinapalitan ko ayaw eh hahahaha

 

[Ulti_xplorer22]

Unlocked na po sakin grabe wala pang 10 minutes hahaha.

Btw alam niyo po pano mapalitan yung apn ng r281? Pinapalitan ko ayaw eh hahahaha

Tanong ka sa mga masters dto, ask mo na rin si Lodi zxshiels.

 

[_ameee]

welcome. successful lods?

di pa dumating order ko sir

 

[gallium8]

di pa dumating order ko sir

Pa share din nung firmware 1 & 2 mo, try ko sa R281 kom Tnx

 

[malows08]

Pa share din nung firmware 1 & 2 mo, try ko sa R281 kom Tnx

Yung firmware po pang v4.2 bb 2.2 unli reset na po at disabled update na po?

 

[_ameee]

kay randomthinker po yun sir

Pa share din nung firmware 1 & 2 mo, try ko sa R281 kom Tnx

 

[gallium8]

kay randomthinker po yun sir

Ok, thanks

 

[H4wk3ye]

May admin access kaya ang R281? Kasi may nakita ako guestnet at masternet access.

 

[gallium8]

May admin access kaya ang R281? Kasi may nakita ako guestnet at masternet access.

Si Lenar parang nag install ng Luci, parang admin access yun. Nag try ako mag install ng Luci, pero di ko makuha, daming hinahanap na ibang dependencies

 

[_ameee]

May admin access kaya ang R281? Kasi may nakita ako guestnet at masternet access.

yata pero yung sa .8.1 yata yon? or yung firmware na default talaga from manufacturer. may nakita kasi ako dati di lang makalogin

 

[y4ngp1]

Mga boss pag nag flash firmware ba ma dodowngrade na yung version? R281

 

[Homeboi]

Newbie lang po nagdl ako nung nginx file nirun ko po tas pumunta sa router.localhost nandun nman yung lte lock band pero pag nagtrtry nako mag lock band plaging failed. Pano rin po yung steps sa easy lockband gamit pc?

 

[gallium8]

Newbie lang po nagdl ako nung nginx file nirun ko po tas pumunta sa router.localhost nandun nman yung lte lock band pero pag nagtrtry nako mag lock band plaging failed. Pano rin po yung steps sa easy lockband gamit pc?

Try mo clear cache yung browser bago ka mag band locking.
Dito yung easy band locking:
https://phcorner.net/threads/pldt-boosteven-r281-band-locking.1149985/page-143#post-21861925

 

[randomthinker123]

Mga lods, panu kayo ito gamitin?

ubus call util_wan set_currentband_info '{"ril_mode":"String","gsm_band":"String","umts_band":"String","lte_band_h":"String","lte_band_l":"String"}'

kapag ito ang niswnd ko nag ok naman sya. Balak ko sana mag band prioritization

ubus call util_wan set_currentband_info '{"ril_mode":"5","gsm_band":"78","umts_band":"145","lte_band_h":"0","lte_band_l":"134217732","band_Priority_1":"1","srv_domain":"2","band_Priority_2":"1","lte_band_e":"0"}'

hindi ko alam kung ano ilalagay dun sa band priority 1 and 2

ito kac ang laman ng current band info

root@cpe:/# ubus call util_wan get_currentband_info
{
        "response": {
                "ril_mode": 5,
                "gsm_band": 78,
                "umts_band": 145,
                "lte_band_h": 0,
                "lte_band_l": 134217732,
                "band_Priority_1": 0,
                "srv_domain": 2,
                "band_Priority_2": 2,
                "lte_band_e": 0
        }

 

[Homeboi]

Try mo clear cache yung browser bago ka mag band locking.
Dito yung easy band locking:
https://phcorner.net/threads/pldt-boosteven-r281-band-locking.1149985/page-143#post-2186192Cge

Cge po try ko clear cache , salamat po sa link last question po pano po enable ssh telnet? Yun kasi sabi dpat daw nka enable na ssh

 

[zxshiels]

Mga lods, panu kayo ito gamitin?

ubus call util_wan set_currentband_info '{"ril_mode":"String","gsm_band":"String","umts_band":"String","lte_band_h":"String","lte_band_l":"String"}'

kapag ito ang niswnd ko nag ok naman sya. Balak ko sana mag band prioritization

ubus call util_wan set_currentband_info '{"ril_mode":"5","gsm_band":"78","umts_band":"145","lte_band_h":"0","lte_band_l":"134217732","band_Priority_1":"1","srv_domain":"2","band_Priority_2":"1","lte_band_e":"0"}'

hindi ko alam kung ano ilalagay dun sa band priority 1 and 2

ito kac ang laman ng current band info

root@cpe:/# ubus call util_wan get_currentband_info
{
        "response": {
                "ril_mode": 5,
                "gsm_band": 78,
                "umts_band": 145,
                "lte_band_h": 0,
                "lte_band_l": 134217732,
                "band_Priority_1": 0,
                "srv_domain": 2,
                "band_Priority_2": 2,
                "lte_band_e": 0
        }

Band priority
0 - default
1 - TDD preferred
2 - FDD preferred

 

[randomthinker123]

Band priority
0 - default
1 - TDD preferred
2 - FDD preferred

ahh, ganun pala yun.. so pwede po ba ito for band prioritization master zxshiels?

 

[y4ngp1]

AT+ZNLOCKBAND=1,0,10008000000,0
pero walang CA ng fdd tsaka tdd sabay. band 41 pwede mag intra band ca sa other freq ng 41

dapat ba available sa isang tower dalawang frequency para makapag intra band boss? like 41/41 ?

mukhang sa pinas lang outdated ca

 

[axy_david]

Can we openline r281 v4.2 yet?