Closed PLDT Home Fibr Full admin

[Shance]

Good day Sir/Ma'am,

Ask ko lang po kung may other way pa para maopen yung full admin ng PLDT Modem po?

Nagsearch na ako google pero ayaw po gumana e.

Tsaka tumawag na ako sa PLDT customer service sabi nila maoopen nila yun pero need ng waiver.

currently credential na ginagamit ko is yung ADMIN hindi po yung ADMINPLDT

Need ko kasi yung full admin para maaccess ko po yung QOS para malimit po yung mga device na nagdadownload.

Thank you

 

[ickie1593]

Yung isangbkong ONU na RP2631 di nagana yung default password nung adminpldt kahit na nireset ko na. Di ko alam kung paano gagawin dun

 

[pcuser88]

boredom
Check mo na lang video ni 'Xiao Yans Zing" sa YT (salamat kay jivexyz sa ibang forum). Baka makatulong. Kelangan ma-secure yung modem at network mo.

In case lumabas blank page (wala sa tutorial), restart lang ang modem.

 

[bon_garcon]

wala sa intructions cnabi ko may ganyan username, not sure kung saan mo nakuha yan.

akala ko kasi nkafilter haha. Kung kukunin mo lahat ng special characters, yan ang lalabas. Yan kasi yung old username.

 

[bon_garcon]

Thanks. Naaccess ko na ang adminpldt. Yung login details ng fiberhomesuperadmin lang ang pinalitan ni pldt. If na change niyo na yung adminpldt password niyo noon before the update, yung parin ang gamitin niyo.

 

[boredom]

ganyan din sakin boss nagawa ko ung 1st step kaso ayaw na mag log in sa 2nd step "username and password error" ang nakalagay

Anong error?

 

[ickie1593]

ganyan din sakin boss nagawa ko ung 1st step kaso ayaw na mag log in sa 2nd step "username and password error" ang nakalagay

same sa akin. ayaw din na yung dati kong password sa adminpldt kahit yung default password ayaw din

 

[pcuser88]

boredom
ickie1593

I-type https://. Hwag yung pasok lang ng address sa browser. Pag wala kasi ang "s," lalabas ang username o password error. Lilituhin ka lang.

 

[ickie1593]

boredom
ickie1593

I-type https://. Hwag yung pasok lang ng address sa browser. Pag wala kasi ang "s," lalabas ang username o password error. Lilituhin ka lang.

Salamat po. okay na

 

[matter0820]

boss patulong makapag full admin access same lang kame ng problem nung gumawa ng thread
salamat boss

 

[ronilo2nd]

Yung 1st ay SUCCESS!, A BIG THANKS pero yung 2nd ay hindi.

Same

 

[ickie1593]

Same

run nyo po yung You do not have permission to view the full content of this post. Log in or register now.

 

[Paolo2019]

Hi All, was able to logon as adminpldt per guide on this thread and was able to set the needed settings (enable lan ports). Though after restart (on/off) yung modem di na ako makapag log on using the credentials (provided and newly set). I had to do a hard reset (yung small button sa likod na need ng paper clip) and start over which went ok naman. Pero after restart (on/off) ng modem ayaw nanaman mag login as adminpldt. Please advise. TIA

 

[Jdjdjd828]

maganda yan

 

[ickie1593]

Hi All, was able to logon as adminpldt per guide on this thread and was able to set the needed settings (enable lan ports). Though after restart (on/off) yung modem di na ako makapag log on using the credentials (provided and newly set). I had to do a hard reset (yung small button sa likod na need ng paper clip) and start over which went ok naman. Pero after restart (on/off) ng modem ayaw nanaman mag login as adminpldt. Please advise. TIA

kapag firsttime maglogin as adminpldt yung default password gagamitin mo po at required sya palitan sa first login. sa next login mo yung new password na poa gagamiting nyo

 

[Ruler]

Boss meron po kayo alam d2

 

[zero-seven]

• Usernames: f~i!b@e#r$h%o^m*esuperadmin
• Passwords: s(f)u_h+g|u
• Usernames: adminpldt
• Passwords: z6dUABtl270qRxt7a2uGTiw

ctto

 

[Bl4ckC4p_03]

Sharing the below found from another thread, credits to un11known...

Instructions for RP2631

Go to You do not have permission to view the full content of this post. Log in or register now. login with this credentials username: f~i!b@e#r$h%o^m*esuperadmin password: s(f)u_h+g|u
Then enable web admin, then after applying the credentials, logout and proceed to You do not have permission to view the full content of this post. Log in or register now. you will notice that the label on the username is not change as administrator, you will now login with this credentials username: adminpldt password: z6dUABtl270qRxt7a2uGTiw after login you will prompt to change your password.

After performing the change password you can now manage the router according to some advance changes you wish to apply, remember the url for this management is You do not have permission to view the full content of this post. Log in or register now. using adminpldt

paps paano kung nababago ung label?
from username tapos nung pinalitan ko ng You do not have permission to view the full content of this post. Log in or register now. ang You do not have permission to view the full content of this post. Log in or register now. naging administrator sya

 

[mortifer07]

pahelp din po ako paano po ba Yung full admin

 

[mortifer07]

ako din po please

 

[mortifer07]

ok na po pala hehe I figured it out