Nontikweed
Forum Master
- Joined
- Dec 30, 2018
- Posts
- 15,591
- Solutions
- 48
- Reaction
- 20,426
- Points
- 5,519
to all TP TL-WR940n eto na pag kakataon hinahanap nyo
walang basagan ng trip
trip ko mag share maski diko napagana
( hehe ang gulo )
install OPENWRT to tour TP-WR940n
You do not have permission to view the full content of this post. Log in or register now.
flashing firmware to your TL-WR940n OPENWRT
go to 192.168.0.1
search update firmware then chose ( first_openwrt-18.06.1-ar71xx-tiny-tl-wr940n-v6-squashfs-factory-eu )
click update
wait until restart it self
after that finish
go now to 192.168.1.1
user: root
pass: root
then system tab see firmware upgrade / restore
drag down to firmware sysupgarde apply ( tl-wr940n-v6-squashfs-sysupgrade )
then proceed now
wait until restart it self
and thats it FINISH
over all diko na alam i set ovpn .
kasi nung ma set ko config ..
parang me kulang ,, diko sure need i apply yung CA certificate ng vpn
SHARE nyo nalang sakin kung panu paganahin iyun hehe
___
Nakupo nasira hindi maka log in sa WEB INTERFACE
unbrick trick
You do not have permission to view the full content of this post. Log in or register now.
TP TL-WR940N unbricked trick
power on router
set ipv4 192.168.0.6
255.255.255.0
save
run admin TFTP
Current directory of your file ( wr940nv6_tp_recovery )
server interface chose 192.168.0.66
off router / then hold reset then on router ,, wait until TFTP respond to fash
it will restart it self
then back to tcp/ip4 ,, choose obtain an ip ,, save
then there you Go ,, your TPlink tl-wr940 is back
Credit : Ronnie Valdez
/nontiquid
walang basagan ng trip
trip ko mag share maski diko napagana
( hehe ang gulo )
install OPENWRT to tour TP-WR940n
You do not have permission to view the full content of this post. Log in or register now.
flashing firmware to your TL-WR940n OPENWRT
go to 192.168.0.1
search update firmware then chose ( first_openwrt-18.06.1-ar71xx-tiny-tl-wr940n-v6-squashfs-factory-eu )
click update
wait until restart it self
after that finish
go now to 192.168.1.1
user: root
pass: root
then system tab see firmware upgrade / restore
drag down to firmware sysupgarde apply ( tl-wr940n-v6-squashfs-sysupgrade )
then proceed now
wait until restart it self
and thats it FINISH
over all diko na alam i set ovpn .
kasi nung ma set ko config ..
parang me kulang ,, diko sure need i apply yung CA certificate ng vpn
SHARE nyo nalang sakin kung panu paganahin iyun hehe
___
Nakupo nasira hindi maka log in sa WEB INTERFACE
unbrick trick
You do not have permission to view the full content of this post. Log in or register now.
TP TL-WR940N unbricked trick
power on router
set ipv4 192.168.0.6
255.255.255.0
save
run admin TFTP
Current directory of your file ( wr940nv6_tp_recovery )
server interface chose 192.168.0.66
off router / then hold reset then on router ,, wait until TFTP respond to fash
it will restart it self
then back to tcp/ip4 ,, choose obtain an ip ,, save
then there you Go ,, your TPlink tl-wr940 is back
Credit : Ronnie Valdez
/nontiquid
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.