Credits to Guoguijun5, Argotron, Totoymola, Rald0625 and company...mention nyo nalang kung sino pa dapat idagdag hehehe
This is a hybrid of openline firmware and stock firmware provided by the aliases mentioned above.
There are numerous feedback that LTE signal cannot be detected or getting lesser LTE signal bar after flashing earlier firmwares. I personally experienced that from 2 LTE signal bar inside my room to 0 after flashing the openline firmware.
I have L02H hardware version and as per argotrons instruction his firmware is ported to L02D and L02E so I was thinking that might be the reason but I am wrong it is not related to board version but to the firmware itself. Wheteher you have L02H, L02B, L02C after flashing hardware version in web ui will appear as L02D.
Next thing I did was to flashed totoymola's stock firmware for smart and sun network and LTE signal went back to 2 signal bar. (Strongly suggests that LTE signal issue is firmware related)
Then I just think that there can be a possible fix to LTE signal issues while maintaining openline status by trying to mix and match each files inside SWD folder of the 2 firmwares mentioned.
After an overnight work of mix matching I finally openline my FX PR2 without LTE signal issue
Screenshot of proof provided, I just missed taking a screenshot of 0 signal bar
---------------@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@--------
Changes from factory default firmware:
UPDATED NA!! MARCH 19, 2017
stock based firmware ito meaning sa SMART mismo galing ang firmware minodify lang ang 2 files para ma openline na galing kay sir Agrotron. kaya ang WEB UI username and password still smartbro na dati naging admin sa unang post ko.
After inserting other sim card enter 123456 as MEP PIN
Red LED on signal indicator after inserting Globe sim card (if 4G HSPA+ or 3G signal detected) but doesn't affect performance. Yellow signal if LTE signal
UPDATE: Maayos ang red signal kapag naka LTE only lang sa globe at may masagap na signal (back to yellow LED light sa signal indicator). Therefore hinde buggy ang firmware na modify ko proof nandito sa pic.
Kapag naka 4g hspa+ or 3g duon nag re red light ang signal light sa globe. Globe LTE signal detected back to yellow yan.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
For instruction refer to this post by Argotron but use the firmware that I will provide
https://phcorner.net/t/smart-bro-evoluzn-fx-pr2l-unlocking-reviving-update-12-01-16.216720/
DON'T FORGET TO INSTALL NECESSARY DRIVERS PROVIDED ON THE ABOVE LINK FOR FIRST TIME FLASHERS
THIS IS THE OPENLINE FIRMWARE WITH LTE SIGNAL FIX FOR FX PR2 and Youwin M023IT/M022 USE THIS FOR FLASHING
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post.
Log in or register now.
I appreciate your feedback and like hahaha 1 like=1 prayer hehehe
1st release
This is a hybrid of openline firmware and stock firmware provided by the aliases mentioned above.
There are numerous feedback that LTE signal cannot be detected or getting lesser LTE signal bar after flashing earlier firmwares. I personally experienced that from 2 LTE signal bar inside my room to 0 after flashing the openline firmware.
I have L02H hardware version and as per argotrons instruction his firmware is ported to L02D and L02E so I was thinking that might be the reason but I am wrong it is not related to board version but to the firmware itself. Wheteher you have L02H, L02B, L02C after flashing hardware version in web ui will appear as L02D.
Next thing I did was to flashed totoymola's stock firmware for smart and sun network and LTE signal went back to 2 signal bar. (Strongly suggests that LTE signal issue is firmware related)
Then I just think that there can be a possible fix to LTE signal issues while maintaining openline status by trying to mix and match each files inside SWD folder of the 2 firmwares mentioned.
After an overnight work of mix matching I finally openline my FX PR2 without LTE signal issue
Screenshot of proof provided, I just missed taking a screenshot of 0 signal bar
---------------@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@--------
Changes from factory default firmware:
UPDATED NA!! MARCH 19, 2017
stock based firmware ito meaning sa SMART mismo galing ang firmware minodify lang ang 2 files para ma openline na galing kay sir Agrotron. kaya ang WEB UI username and password still smartbro na dati naging admin sa unang post ko.
After inserting other sim card enter 123456 as MEP PIN
Red LED on signal indicator after inserting Globe sim card (if 4G HSPA+ or 3G signal detected) but doesn't affect performance. Yellow signal if LTE signal
UPDATE: Maayos ang red signal kapag naka LTE only lang sa globe at may masagap na signal (back to yellow LED light sa signal indicator). Therefore hinde buggy ang firmware na modify ko proof nandito sa pic.
Kapag naka 4g hspa+ or 3g duon nag re red light ang signal light sa globe. Globe LTE signal detected back to yellow yan.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
For instruction refer to this post by Argotron but use the firmware that I will provide
https://phcorner.net/t/smart-bro-evoluzn-fx-pr2l-unlocking-reviving-update-12-01-16.216720/
DON'T FORGET TO INSTALL NECESSARY DRIVERS PROVIDED ON THE ABOVE LINK FOR FIRST TIME FLASHERS
THIS IS THE OPENLINE FIRMWARE WITH LTE SIGNAL FIX FOR FX PR2 and Youwin M023IT/M022 USE THIS FOR FLASHING
You do not have permission to view the full content of this post. Log in or register now.
Spoiler contents are visible only to Established Members.
I appreciate your feedback and like hahaha 1 like=1 prayer hehehe
1st release
Spoiler contents are visible only to Established Members.
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.
Last edited by a moderator: